Lanier 5227 - Manual (Page 84)

Message List
6 - 24 Additional Functions
NetBEUI When the Network Interface Card is Started
TCP/IP
When the Address is Configured
No local target for “print server name” Cannot get routing information on the
file server. If a different frame type is
configured from that used on the
network, you should select “Auto
Select” as a name type.
Required file server “file server name”
not found. Cannot find the required file server.‘
Required printer server “printer server
name” cannot be found. Cannot find the printer server. COnfirm
the name of the print server.
Unable to attach to print server “print
server name” Cannot connect to the print server. The
print server refuses a connection for
some reason. Confirm the configuration
of the print server.
Item Name Description
Back to default name (computer name) The same computer name is detected on
the network. As unable to add computer
name to the suffix, computer name back
to default name. Configure a new
computer name that is unique.
Print session full Cannot accept the print session.
Required computer name (COmputer
name) is a duplicated name The same computer name is detected on
the network. The start job determines
the computer name by adding the
computer name to the suffix (0,1,...)
Configure a new computer name that
unique.
Item Name Description
Invalid gateway address The Gateway address is not correct for
the specified IP address.
Item Name Description