Lantronix XPress DR+ - Manual (Page 27)

Chapter 3: Installation and Hardware
XPress DR+ User Guide 27
Wall Mount Bracket
Included with the XPress DR+ is an accessory DIN-rail wall mount bracket that makes it
very easy to mount the unit in locations where a DIN-rail is not available.
Figure 3-11. Wall Mount Bracket
Product Information Label
The product information label on the underside of the unit contains important information
about your specific unit:
‹ Bar code
‹ Serial number
‹ Product ID (name)
‹ Product description
‹ Hardware address (also referred to as Ethernet or MAC address)
Your unit will have one similar to the one below.
Figure 3-12. Product Label
Note: Before mounting the device on a DIN-rail, copy the information from the
label.