Host list configuration, Figure 6-4. hostlist settings – Lantronix XPress DR+ User Manual

Page 50

Advertising
background image

Chapter 6: Configuration Using Web Manager

XPress DR+ User Guide

50

0x77FE Server Port

N/A

MTU Size

The Maximum Transmission Unit (MTU) is the largest physical
packet size a network can transmit for TCP and UDP. Enter
between 512 and 1400 bytes. The default setting is 1400
bytes.

3. When you are finished, click the OK button.

4. To save and reboot, on the main menu, click Apply Settings.

Host List Configuration

The XPress DR+ scrolls through the host list until it connects to a device listed in the host
list table. After a successful connection, the unit stops trying to connect to any others. If
this connection fails, the unit continues to scroll through the table until the next successful
connection.

The host list supports a minimum of 1 and a maximum of 12 entries. Each entry contains
an IP address and a port number.

Note:

The host list is disabled for Manual and Modem Mode. The unit does not

accept a data connection from a remote device when the hostlist option is
enabled.

To configure the unit's host list:

1. On the main menu, click Hostlist.

Figure 6-4. Hostlist Settings

2. Enter or modify the following fields:

Advertising