LevelOne GNS-2000 - Manual (Page 13)

12
Server
Name: 1. The Default Name is shown.
Change this if you wish.
Workgroup
Name: 2. Normally, this name should match
the Workgroup name used by PCs
on your LAN.
Time Zone 3. Select your time zone from the list.
Local
Date/Time 4. Enter the local date (mm/dd/yyyy
format) and time.
Click "Next" to continue. The following screen is displayed.
Click "Save" to save your data to the GNS-2000.
On the resulting screen, click "Exit" to close the Setup Utility.
The GNS-2000 is now operational.
All settings are displayed.
Please confirm they are
corrected, then click
“ Save” .
After saving, a final screen
will be displayed.
Click “ Exit” to close the
Setup Utility.