Lexicon RV-8 - Manual (Page 52)

Setup Lexicon
3-4
INPUT SETUP
Selecting the SETUP menu INPUTS option prompts the selection of a desired input (e.g., DVD1). Selecting an input opens the corresponding
INPUT SETUP menu, which is used to change the input name, assign audio and video input connectors, select preferred listening modes and
configure advanced Main Zone and Zone 2 input settings.
All INPUT SETUP menus are shown in the Appendix on page A-6. The parameters on the left side of the INPUT SETUP menus are identical,
regardless of which input is selected. The parameter settings on the right side are adjustable. Default parameter settings differ from input to input.
The INPUT SETUP menus shown in the Appendix indicate factory-default parameter settings for each input.
INPUTS SETUP (INPUT) INPUT SETUP
INPUT SETUP
DVD2
TV
SAT
VCR
CD
TUNER
PHONO
The DVD1 INPUT SETUP menu is shown here as an example, and will continue to be shown as an example throughout this section. Whenever it appears, any other INPUT SETUP
menu can be substituted. Likewise, whenever the DVD1 input appears as a step in a menu path, any other input can be substituted.
DVD1 INPUT SETUP
NAME
DIGITAL IN
ANALOG IN
VIDEO IN
COMPONENT IN
2-CH
MIC
D
DVD1
COAX-1
NONE
AUTO
S-VIDEO-1
1
FILM
5.1 FILM
FILM
ANLG IN LVL
LIVE! MED
DVD1
MAIN ADVANCED
ZONE2 IN
DIGITAL
SETUP
INPUTS
SPEAKERS
I/O CONFIG
DISPLAYS
VOLUME CONTROLS
TRIGGER
LOCK OPTIONS
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
TUNER PRESETS
LIVE! CALIBRATION
SETUP
TUNER SETUP
ZONE2 ADVANCED
5.1a FILM 5.1a POWER MANAGEMENT