Lexicon Power Amplifer GX-7 - Manual (Page 12)

Basic Operation Lexicon
2-2
FRONT PANEL OVERVIEW
The GX-7 front panel is shown below. The standby/on button is the only front panel control.
STANDBY/ON BUTTON
Activates and deactivates standby mode when the GX-7 amplifier is powered on with the rear panel master power switch. The standby/on
button performs no function when the amplifier is powered off with the rear panel master power switch.
When the unit is on, pressing the standby/on button activates standby mode and deactivates the power amplifier. When in standby mode, the
front panel LED is red. Power is still supplied to the GX-7 when it is in standby mode.
When the unit is in standby, pressing the standby/on button activates the power amplifier. When the GX-7 is activated, the front panel LED is
blue.
Note:
When the status of the GX-7 changes, relay clicks may be audible. This is normal operation.