Important safety instructions, Caution, Warning – Lexicon Power Amplifer GX-7 User Manual

Page 2

Advertising
background image

IMPORTANT SAFETY INSTRUCTIONS

1.

Read these instructions.

2.

Keep these instructions.

3.

Heed all warnings.

4.

Follow all instructions.

5.

Do not use this apparatus near water.

6.

Clean only with a dry cloth.

7.

Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.

8.

Do not install near any heat sources such as
radiators, heat registers, stoves, or another
apparatus (including amplifiers) that produces heat.

9.

Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding-
type plug has two blades and a third grounding
prong. The wide blade or the third prong are
provided for your safety. If the provided plug does
not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.

10. Protect the power cord from being walked on or

pinched particularly at plugs, convenience recep-
tacles, and the point where they exit from the
apparatus.

11. Install the unit so that the power switch can be

accessed and operated at all times.

12. Main Plug is considered to be the disconnect

device for this product and shall remain readily
operable.

13. Only use attachments/accessories specified by the

manufacturer.

14. Use only with the cart, stand, tripod, bracket, or

table specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid
injury from tip-over.

15. Unplug this apparatus during lightning storms or

when unused for long periods of time.

16. Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been
damaged in any way, such as when a power-supply
cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.

Refer to the manufacturer’s operating
instructions for power requirements. Be
advised that different operating voltages may
require the use of different line cord and/or
attachment plug.

Do not install the unit in an unventilated rack,
or directly above heat-producing equipment
such as power amplifiers. Observe the
maximum ambient operating temperature
listed in the product specification.

Never attach audio power amplifier outputs
directly to any of the unit’s connectors.

This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of FCC Rules. These limits are designed to
provide reasonable protection against harmful inter-
ference in a residential installation. This equipment
generates, uses, and radiates radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
or television reception, which can be determined by
turning the equipment off and on. The user is encour-
aged to try to correct the interference by one or more
of the following measures:

Re-orient or relocate the receiving antenna.

Increase the separation between the equipment
and the receiver.

Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.

Consult the dealer or an experienced electronic
technician for help.

To reduce the risk of fire or electric
shock, do not expose this apparatus to
rain or moisture. Do not place objects
containing liquid, such as vases, on this
apparatus.

WARNING

This triangle, which appears on your component,

alerts you to the presence of uninsulated,

dangerous voltage inside the enclosure -

voltage that may be sufficient to

constitute a risk of shock.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

This triangle, which appears on your component,

alerts you to important operating and

maintenance instructions in this

accompanying literature.

Advertising