Lowrance electronic GlobalMap 7000C - Manual (Page 100)

94
On the Edit Trail menu, press
↓ or ↑ to highlight the section you wish
to change, then press ENT . Make your changes, then press EXIT to erase
this menu.
You can also change the trail line color and pattern. For instructions,
see the entries on Edit a Trail Color and Edit a Trail Pattern beginning
on page 61, Sec. 4, Advanced GPS Operations.
Units of Measure
This menu sets the speed and distance (statute or nautical miles, me-
ters), depth (feet, fathoms, or meters), temperature (degrees Fahrenheit
or Celsius) and heading (true or magnetic) units. To change the units:
Press MENU | MENU |
↓ to
S
YSTEM
S
ETUP
| ENT | ENT .
System Setup Menu, left, Units of Measure Menu, right.
To set Speed/Distance Unit of Measure: Press
↑ or ↓ to change the
Speed/Distance, then press ENT . After the option is set, press
EXIT | EXIT | EXIT to return to the page display.
To set Heading: Press
↑ or ↓ to change the heading type, then press
ENT . After the option is set, press EXIT | EXIT | EXIT to return to the page
display.