Polycom TransTalk 9000-Series - Manual (Page 148)

Feature Reference
5-38
Considerations
Standard phones and system phones without a programmed VMS Cover button
cannot override this feature once it is assigned to an extension.
Valid Entries
1 = Assigned
2 = Not Assigned
✔
Programming
(See Figure 2-3 on page 2-22 for the location of special programming buttons such
as
s and e on system phones.)
To change the Automatic VMS Cover setting for an extension:
1. Press f0 0 s s # 3 1 0 at extension
10 or 11.
2. Enter the number of the extension to be covered by the voice messaging
system. For example, to program extension 11, press 1 1 .
3. To assign or unassign Automatic VMS Cover, press D until the
appropriate value displays.
4. To program another extension, press n or p until the
extension number shows on the display. Then repeat Step 3.
5. Select another procedure or exit programming mode.