Polycom TransTalk 9000-Series - Manual (Page 196)

Feature Reference
5-86
3. At the Extension: prompt, enter the number of the extension to be
programmed. For example, to select extension 31, dial 3 1 .
4. To assign or unassign the extension, press D until the appropriate
value displays.
5. At this point:
■ To program another extension, press n or p until the
extension number shows on the display. Repeat Step 4.
■ To program another group, press N or P and
repeat Steps 2 through 4.
6. Select another procedure or exit programming mode.