Polycom RMX 2000 - Manual (Page 21)

Polycom RMX 2000 Getting Started Guide
2-7
Procedure 2: Modifying the Factory Default Management
Network Settings
Management Network Definition
Management Network Definition can be done by two methods:
•
USB key – The system is shipped with a USB key containing the
default IP addresses for the control unit and the shelf management.
These defaults are first modified in the PC and then uploaded to the
RMX.
• Direct connection – Creating a private network between the Polycom
RMX 2000 and the computer and modifying the management
network parameters using the Polycom RMX 2000 Web Client.
For more information about the direct connection method, see RMX 2000
Administrators’s Guide, Appendix F: "Configuring Direct Connections to
RMX” on page F-1 .
Modifying the USB key settings
The USB key contains a text file, lan.cfg, which holds the factory default IP
address parameters. These parameters must be modified to your local
network settings.
To modify the USB key settings:
1
Plug the USB key into the PC.
2 Use a text editor program (WordPad, Notepad, etc.) to Open lan.cfg.