Polycom VIDEOPLUS VR630/07 - Manual (Page 13)

13 EN
General information
'Tape List' helps you keep track of which movie
is on which cassette. Tape List gives you also a
quick and easy access to recordings.
If desired, the video recorder will rewind to the
beginning of the selected recording and auto-
matically start playback.
Adding a cassette to the Tape List
You can add any cassette to the 'Tape List'.
Please note that the process for adding cas-
settes that already have recordings on them
lasts longer than with new (blank) cassettes.
1. 1. Switch on the TV set. If required, select the
programme number for the video recorder.
2. 2. Label the cassette to be inserted with a num-
ber from 1 to 9.
3. 3. Insert the cassette into the video recorder.
4. 4. Enter the cassette number using the
number buttons on the remote control.
The video recorder will briefly check the cas-
sette inserted. 'INITIALIZING' appears on the
TV screen.
Editing recording titles
In the Tape List, all recordings longer than 10
minutes (LP= 20 minutes) are displayed with
cassette number, recording title and length of
recording. The TV channel, time and date are
saved as a title.
The title of this recording can only be changed
after the recording has been completed.
To do this, the corresponding cassette does not
have to be in the video recorder. In the following,
you will read how to customise the titles to your
wishes.
0..9
4. Tape List [VRQ45]
Can I add cassettes that already have
recordings on them to the Tape List?
Yes. Please note that Tape List can manage up
to 9 cassettes and a maximum of 50 titles.
TAPE LIST
INITIALIZING
PLEASE WAIT...
- - - - - - - - - - - - - - - - - - - - - - - -
I see a cassette number and an overview of
all recordings on this cassette
* You have selected a number that has already
been included in the Tape List and contains a
recording.
On the screen after 'INITIALIZING' I see the
message 'SEARCHING... PLEASE WAIT
There are already recordings on the cassette.
This cassette is searched for recordings and
added to the Tape List.
Why must I note the cassette number?
When searching for available recordings, you
will need to insert the corresponding
cassette(proper cassette number).
How many cassettes can I save in the Tape
List?
You can store up to 9 cassettes and 50 titles in
the Tape List.
I see the message 'TAPE LIST FULL' on the
screen
The maximum of cassettes/titles is reached. You
cannot add any cassette or titles unless you
first delete titles (recordings) or cassettes out of
the Tape List.
SELECT K L CHOOSE B
NO.
TITLE LENGTH
1 BBC 11:10 01:12 35M
CNN 12:10 13:12 25M
BBC1 10:30 23:12 120M
2 MTV 23:30 10:10 40M
BBC1 22:25 28:12 125M
END=EXIT EDIT=MENU
PWR.
VR630/07 02.2.6 10:13 AM Page 13