Pentax 67II - Manual (Page 16)

BASIC OPERATION [PREPARATION]
14
Loading the Batteries Remove the battery chamber
cover with a coin or similar object
as shown in the illustration.
Load two 3V lithium batteries
(CR123A or the equivalent) as
shown in the illustration.
Turn the battery chamber cover
in the direction of the arrow to
lock it securely.
● If any indicators are not
displayed on the LCD panel
even though a battery is
loaded, confirm that the
battery chamber cover is
closed at the correct angle.
● Do not replace the battery
while winding up the film. If
you do so, the film counter
on LCD panel advances by
two from the current
display and the number of
pictures that can be taken
decreases by one.
● Do not wind up the film
when the battery is not
loaded in the camera. The
space between frames
may increase causing the
number of pictures that can
be taken to decrease.
Next page ➥➥
1
2
3