Pentax 67II - Manual (Page 20)

BASIC OPERATION [PREPARATION]
18
Attaching the Lens Remove the body mount cap by
turning it in the direction of the
arrow.
Align the red dots on the camera
and lens mount, attach the lens
to the camera body, and turn it
fully to the right until you hear a
click.
To remove the front lens cap,
squeeze the tabs on both sides
in the direction of the arrow.
● See the operation manual
“INTERCHANGEABLE
LENSES” for 67 lenses
when attaching or
removing an outer bayonet
lens for a large lens.
● Do not operate the lens
release lever shown in
page 19 when attaching
the lens. Doing so may
result in the lens not being
able to be attached to the
camera properly.
● We assume no
responsibility nor liability
for damages resulting from
the use of lenses made by
other manufacturers.
1
2
3