How to charge – Olympus BU-300 User Manual

Page 9

Advertising
background image

9

How to charge

1

Connect the power plug to the main unit's
AC connector. (BU-300E only)

2

Insert the batteries as detailed in "How to
insert the batteries" in the instructions.

3

Plug in type (BU-300U)
Insert the plug into the electrical outlet (AC
100-240V) according to the diagram.
Power Plug type (BU-300E)
Insert the power plug into an electrical
outlet (AC100 - 240 V).
The red charge indicator lights and begins
charging the batteries.

4

When charging is complete, the charge
indicator goes out.
Be sure to disconnect the power plug from
the outlet when charging is complete.
Then remove the batteries.

Notes:

● Batteries may become warm while charging, but this is not malfunction.

● There may be static on other electronic equipment (such as a radio or television) if the

battery charger is plugged in to the same outlet. If this occurs, plug the battery charger into a
different outlet.

● Avoid charging or discharging close to a heat source (such as in front of a heater or in direct

sunlight).

● Charge batteries within the temperature range of 0

°C

- 40

°C

/32

°F

- 104

°F

.

● When you carry the batteries, use the provided battery case to avoid damage or short-

circuits.

● A humming sound may occur during charging. This is normal and is not a malfunction.

ENGLISH

*

The shape of the plug varies
depending on the country.

Power Plug type
(BU-300E)

Plug in type
(BU-300U)

Advertising