Olivetti D-COLOR P26 - Manual (Page 111)

Menu functions> 111
S
YSTEM CONFIGURATION MENU
This menu adjusts general printer settings to suit the way you
prefer to work.
I TEMS S ETTINGS E XPLANATION
POW SAVE TIME 5
15
30
60
240
Adjusts the idling time before the
printer automatically switches into
power saving mode. In this mode
power consumption is reduced to a
low level required to just keep the
printer operating and ready to
receive data. When a job is sent the
printer will require a warm-up time
of up to 1 minute before printing can
begin.
PERSONALITY AUTO
PCL
IBM PPR III XL
EPSON FX
PS3
EMULATION This item selects which industry
standard emulation your printer
should use. When set to AUTO,
incoming data is examined and the
correct emulation is automatically
selected each time a print job is
received.
USB PS
PROTOCOL RAW
ASCII Selects PostScript data format for
USB port.
NET PS
PROTOCOL RAW
ASCII Selects PostScript data format for
network port.
CLRABLE
WARNING ON
JOB When ON, non-critical warnings,
such as requests for a different
paper size, can be cleared by
pressing the
ON LINE button.
When set to JOB, they are cleared
when the print job resumes.
AUTO
CONTINUE ON
OFF Determines whether or not the
printer will automatically recover
from a memory overflow condition.
MANUAL
TIMEOUT OFF
30
60 Specifies how many seconds the
printer will wait for paper to be fed
before cancelling the job.
WAIT TIMEOUT 5~40~300 Specifies how many seconds the
printer will wait when received data
pauses before forcing a page eject.
In PostScript Emulation mode the
job will be cancelled if timeout
occurs.