Olivetti D-COLOR P26 - Manual (Page 119)

Menu functions> 119
M AINTENANCE MENU
This menu provides access to various printer maintenance
functions.
SUBNET MASK xxx.xxx.xxx.xxx Current assigned subnet mask. To
change, proceed as above.
GATEWAY
ADDRESS xxx.xxx.xxx.xxx Current assigned gateway address.
To change, proceed as above.
FACTORY
DEFAULTS EXECUTE Reloads the settings present when
the unit was setup by the
manufacturer.
WEB ENABLE /
DISABLE Enables or disables Web config.
facility.
TELNET ENABLE /
DISABLE Enables or disables Telnet config.
facility.
FTP ENABLE /
DISABLE Enables or disables communication
via FTP.
SNMP ENABLE /
DISABLE Enables or disables SNMP protocol.
NETWORK
SCALE NORMAL /
SMALL Selects network size.
HUB LINK
SETTING AUTO
NEGOTIATE
100BASE-TX
FULL
100BASE-TX
HALF
10BASE-T FULL
10BASE-T HALF Sets full or half duplex for
communication via a network hub.
I TEM S ETTINGS E XPLANATION
I TEM S ETTINGS E XPLANATION
MENU RESET EXECUTE Resets menus to default settings.
SAVE MENU EXECUTE Saves current menu settings as
default values. At confirmation
prompt, press ENTER to confirm
save, or CANCEL to cancel.
POWER SAVE ENABLE /
DISABLE Enables or disables automatic power
save mode. Delay before entering
this mode is set in the system
configuration menu.