Quantum Audio Tape Drives A-Series - Manual (Page 23)

Chapter 2 Getting Started
Resetting System Defaults
Quantum A-Series Tape Drives User’s Guide 7
Figure 2 Certificate of Security
Resetting System Defaults
As there is no access to the A-Series tape drive other than the Ethernet
port, a mechanism has been implemented to reset the settings to their
default values. This is useful if an end user loses the IP address of the
A-Series tape drive.
The system defaults are as follows:
Name Password/Setting
Static IP address 10.10.10.10
Netmask 255.255.255.0
Main login admin
Username root
Default password password