Quantum Audio Tape Drives A-Series - Manual (Page 40)

Chapter 3 Using Your Tape Drive
Power On Self-Test (POST) Troubleshooting
Quantum A-Series Tape Drives User’s Guide 24
Figure 9 SDLT 600A Tape
Drive Front Panel LEDs
4 When POST is complete, the middle LED stops flashing
and remains illuminated; the left LED turns off, and right
LED remains off.
POST
Failure
If POST fails, the middle and right LEDs illuminate
steadily and the left LED flashes.
Note: If a data cartridge is in place when power is turned on, all
stages remain the same except Stage 3. It may take a
considerably longer time for Stage 3 to complete due to tape
rewind and searching operations that occur during that stage.
Stage What You Observe
Green/Orange LED
Green LED
Yellow LED
(Cleaning Required)
(Cartridge Status)
(Drive Status)