TERK Technologies XMDPIO110 - Manual (Page 4)

6
XM Satellite Radio Operation
Please refer to the “XM Operation” section of your Pioneer head unit
operation manual for instructions on your XM satellite radio service.
The information contained in the TERK XMDPIO110 operation
section listed below is provided as a supplement to your Pioneer
manual and is therefore not intended to be a substitution for that
information. If more details are required on a particular function
please refer to your Pioneer head unit operation manual.
Selecting a XM source
1. Press the SOURCE button to select a XM source.
Press the SOURCE button repeatedly to switch between the
following sources: Built-in CD player—Television—Tuner— XM
tuner—Multi-CD player—External unit 1—External unit 2—AUX
2. To turn the unit off press the SOURCE button and hold until the
unit turns off.
Listening to XM
The XM information displayed on the Pioneer head unit as shown
above is:
1. The channel select mode indicator shows what channel select
mode has been selected. CH.No is displayed when CH NUMBER is
selected, and CAT is displayed when CATEGORY is selected.
2. The channel number indicator shows to which channel number
the tuner is tuned.
3. The band indicator shows the band which has been selected.
4. The preset number indicator shows what preset has been selected.
These are the basic steps necessary to operate XM.
• Press SOURCE to select a XM source.
• Press BAND to select a band.
Press BAND until the desired band is displayed, XM1, XM2 or XM3.
• Press or to select a desired channel.
The channel number moves up or down step by step.
Channels that cannot currently be selected are skipped,
and the next channel is selected.
Smart Digit
al Adapt
er
5
Installation
(continued)
Step 7
Return the Pioneer car stereo head unit back to its original
location in the dash board, be careful with cables that you just
installed so that they do not unplug or get kinked by the head unit.
Note: If you had removed screws to pull the Pioneer car stereo
head unit out please screw those back in.
Step 8
If you had removed the dash board during installation please
return it back to its original location.
Completing Activation
Now that your XM Direct system has been installed your XM
Universal Tuner will need to be activated. Details on how to
operate your head unit in XM mode are listed on the following
page. Tune your Pioneer car stereo head unit to the XM Preview
Channel, channel 01 and follow instructions for activation. You
can also go on-line at XMradio.com or call the toll free XM
activation number at 1-800-852-9696. Once you have activated
your tuner box make sure the XM antenna on the outside of your
car has an unobstructed view of the sky.
Smart Digit
al Adapt
er
XM CH No
CH
018
XM 1
P1
1 2 3 4