T-Fal Emerilware - Manual (Page 8)

8
USING YOUR FOOD PROCESSOR
Getting Started
• Before using for the first time, wash all accessory parts in hot, soapy water then dry thoroughly.
Or place them in the dishwasher.
• Set the motor unit on a clean, dry flat surface.
• Plug in your appliance.
• For Pulse (intermittent operation): turn the button (5) to the Pulse position and use in short bursts for
better control of certain preparations.
• For continuous operation: turn the button (5) to the 1 or 2 position.
• To stop: turn the button (5) to the 0 position.
Assembling the Bowl and the Lid
ACCESSORIES USED
• Bowl unit (parts 1, 2 and 3).
ASSEMBLING THE ACCESSORIES
1. Place the bowl (3) on the motor unit (6), with the bowl handle positioned
slightly to the right of the speed selector. (Fig. 1)
2. Place the lid (2) on the bowl (3) with the long tab to the left of the handle.
3. As arrow indicates, turn lid to the right. Long tab fits into handle and locks in
place. (Fig. 2)
4. Lock the whole assembly by turning it toward the right. (Fig. 3)
Note: The lid must be locked onto the bowl before locking the assembly
onto the motor unit (6).
Removing the Bowl and the Lid
1. Unlock by turning the assembly toward the left. (Fig. 4)
2. Unlock the lid by turning toward the left to free it from the bowl handle.
3. Now you can lift and remove your lid.
(Fig. 5)
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5