TP-Link TD-8616B - Manual (Page 18)

TD-8616B ADSL2/2+ Ethernet Modem User Guide
13
Figure 4-6
¾ LAN Setting: These are the IP settings of the LAN interface for the device. These settings
may be referred to as Private settings. You may change the LAN IP address if needed. The
LAN IP address is private to your internal network and cannot be seen on the Internet.
•
IP Address: Enter the Modem’s local IP Address, then you can access to the
Web-based Utility via the IP Address, the default value is 192.168.1.1.
• IP Subnet Mask: Enter the Modem’s Subnet Mask, the default value is 255.255.255.0.
4.2.3 ADSL
Choose “Basic Setup→ADSL”, you can select the ADSL Type and ADSL Mode in the next
screen. The ADSL feature can be selected when you meet the physical connection problem.
Please check the proper settings with your Internet service provider.
¾ ADSL Mode: Select the ADSL operation mode which your ADSL connection uses.
¾ ADSL Type: Select the ADSL operation type which your ADSL connection uses.
4.3 Maintenance
Choose “Maintenance”, you can see the next submenus:
Figure 4-7
Click any of them, and you will be able to configure the corresponding function.