TP-Link TD-8616B - Manual (Page 7)

TD-8616B ADSL2/2+ Ethernet Modem User Guide
2
Chapter 2. Hardware Installation
2.1 The Front Panel
Figure 2-1
The LEDs locate on the front panel, which indicate the device’s working status. For details, please
refer to LED Explanation.
LED Explanation:
Name Status Indication
LAN
On
Off
Flash
LAN port normal
Connection on LAN port abnormal
Data transmitting or receiving on LAN port
ADSL
Slow flash
Quick flash
On
Connection to telecom network is abnormal
Connecting to the telecom network
Connection to telecom network is OK
Act
Flash
Off
There is data transmitting or receiving on WAN
port
No data transmitting or receiving on WAN port
Power
On
Off
Power OK
Power fail
2.2 The Back Panel
Figure 2-2
¾ ON/OFF: The switch for the power.
¾ POWER: The Power plug is where you will connect the power adapter.
¾ RESET: There are two ways to reset the Modem's factory defaults.
Method one: When the device is working, please press the reset button of the Modem, keep
the reset button pressed down for more than five seconds and then wait for the modem to
reboot.
Method two：Restore the default setting from “Maintenance-SysRestart” of the Modem's
Web-based Utility.