Vivitar Digital Binocular Camera viv-cv-530v - Manual (Page 14)

- 14 -
Note
: Photos taken at no compression take up more of the camera‟s memory and therefore
fewer photos can be taken at non-compression than with compression.
The photo resolution and compression settings determine the number of photos that can be
taken and the amount of memory required for each photo.
The following table tells you how many photos can be taken based on the image resolution
and compression:
Number of Captured Photos (According to Resolution and Compression settings)
Frequency - /
The camera has 2 Frequency settings:
- 50HZ for Asia and Europe and - 60HZ for the U.S. and Japan.
To set the camera for the correct frequency:
1. Press the MODE button until the or icon appears on the LCD screen.
2. If the LCD displays , this means the present frequency is 60HZ and in order to
change to 50HZ click the Shutter button.
3. If the LCD displays , this means the present frequency is 50HZ and in order to
change to 60HZ click the Shutter button.
4. All photos taken after changing frequency will be at the new frequency.
5. The frequency setting can be changed at any time.
Note: Using the incorrect frequency setting under fluorescent lighting could result in poor
images or video flickering (when using the WebCam). Set the camera for the correct frequency
for the country that you are in.
Resolution Compression
VGA (640 x 480)
20 photos
VGA (640 x 480)
40 photos
QVGA (320 x 240)
80 photos
QVGA (320 x 240)
160 photos