Vivitar Digital Binocular Camera viv-cv-530v - Manual (Page 7)

- 7 -
Preparing Your Camera for Use
Battery Installation
Your camera requires one (1) AAA battery. Alkaline battery recommended.
Insert the battery into the camera:
1. Open the battery cover at the bottom of the camera.
2. Insert the battery according to the polarity (+ and -) indicated on the inside of the battery
compartment.
3. Close the battery cover.
WARNING: Opening the battery compartment and/or removing the battery will erase the
photos currently stored in the camera. Download your photos and videos as often as possible
so as not to lose them. Photos may also be lost when the batteries runs low.
The LCD will flash when your batteries are running low. This indicates that the battery should
be replaced. Remember, before you open the battery compartment to change the battery,
please download your photos you have on the camera. When the battery voltage drops, the
LCD will display “Lo” and the camera will turn off automatically.
Note: If you do not intend to use your camera for an extended period, remove the battery to
avoid leakage and corrosion.