Vivitar ViviCam 8300s - Manual (Page 24)

Digital Camera >>
EN-24
Setting the Date and Time
The date/time needs to be set if/when:
ViviCam 8300s is turned on for the first time.
ViviCam 8300s is turned on after leaving the ViviCam 8300s without the
battery for an extended period of time.
When the date and time information is not displayed on the LCD monitor,
follow these steps to set the correct date and time.
1. Slide the mode switch to [ ] and set the
mode dial to [ ].
The setup menu is displayed.
2. Select [Custom] with the W/X buttons.
3. Select [Date/Time] with the S/T buttons,
and press the SET button.
The Date/Time setting screen will
be displayed.
4. Select the item’s field with the W /X
buttons and adjust the value for the date
and time with the
S/T buttons.
The date and time is set in the order
year-month-day-hour-minute.
The time is displayed in 24-hours format.
5. After confirming all settings are correct,
press the SET button.
The setting will be stored and the
screen will return to the setup menu.
Adjust
01 01
01 01
2005