Visioneer DP1011 - Manual (Page 25)

Xerox DP1011 User’s Guide 20
User Controls
Adjust the PiP (Picture in Picture)
1. Press the Menu button on the Remote Control or Panel Control
to open the OSD.
2. Select the PiP menu and press the Enter button.
The PiP menu appears.
3. Use the keys to select the item you want, and use the
keys to adjust the selected setting.
4. When the new settings are what you want, press the Menu
button again.
PiP—Turns on and off the PiP function.
PiP Location—Sets the position of the PiP screen on the display
screen
PiP Switch Source—Chooses the input source of the projector on
the PiP screen.
Reset This Menu—Resets the projector’s display settings to their
original factory settings. Select Yes to reset the menu.
NOTE: The OSD does not include a PiP menu in Video mode.