Visioneer DP1011 - Manual (Page 31)

Xerox DP1011 User’s Guide 26
Maintenance
Problem: Image is reversed.
On the On-screen display, go to the Computer/Video Mode/
Management page and select Projection Direction. Change the
direction of projection to display the image properly.
Problem: Lamp burns out or make a popping sound.
When the lamp reaches its end of life, it will burn out and may
make a loud popping sound. If this happens, the projector will not
turn on until the lamp module has been replaced. See “Changing
the Lamp” on page 21 to replace the lamp.