VIEWSONIC WR100 - Manual (Page 23)

ViewSonic Wireless Router 19
Wireless: Mode: click the down arrow for the drop-down menu
with a list of wireless networking modes. Select one of the
following modes based on your environment setting:
• Disable: To disable wireless networking for 802.11g and
802.11b, select Disable.
• 11b+g: If you have 802.11b and 802.11g devices in your
network, then keep the default setting, 11b+g.
• 11g Only: If you have only 802.11g devices, select 11g Only.
• G Plus*: This mode requires the same technology from the
client devices.
* Important! When operating at highest speeds, this Wi-Fi
device achieves an actual throughput of up to 34 Mbps, which
is the equivalent throughput of a system following 802.11g
protocol and operating at a signaling rate of 125 Mbps.
Channel: customize as needed. It is recommended that you
change the channel to prevent interference with other wireless
routers in the vicinity.
SSID: customize as needed. This field automatically defaults to
ViewSonic when 11b+g is selected in the previous Mode field.
For added security, change viewsonic in the SSID to a unique
name.
Security: to enable Security, (recommended), select Enable.
Configure Security: click Configure Security. The Configure
Security screen appears as shown in the next step.