VIEWSONIC WR100 - Manual (Page 58)

ViewSonic Wireless Router 54
4 I can’t connect to other computers on my LAN.
• The IP Addresses of the computers are not set correctly.
Make sure that each computer has a unique IP Address. If
using DHCP through the AP Router, makes sure that each
computer is enable DHCP function and restart the
computer.
• Network cables are not connected properly. Make sure
that the Link LED is on. If it is not, try a different network
cable.
• Windows network settings are not set correctly. Check
each computer for correct network settings.
5 I can’t access the Wireless AP Router from a wireless
network card.
• Out of range. Make sure that your computer is within
range and free from any strong electrical devices that may
cause interference.
• IP Address is not set correctly. Make sure that the Mode,
SSID, Channel and encryption settings are set the same
on each wireless adapter.
• Check your IP Address to make sure that it is compatible
with the Wireless AP Router.