Visioneer MFC7050C - Manual (Page 159)

17-5
U S I N G M U L T I - F U N C T I O N L I N K P R O
Multi-Function
Link
®
Pr
o Software
Receiving Faxes into the PC
To receive faxes into your PC through the MFC, you must first
connect your MFC to your computer. Then, you can load the
Multi-Function Link
® Pro software.
Use the following checklists for the MFC and PC, to make sure
you have properly set up the MFC and PC to work together.
Checklist for the MFC
1 To make sure the MF Link mode is active,
press
Function , 1 , 2 , 7 .
2 Use or to select ON (or OFF).
3 Press Set .
Checklist for Your PC
1 In the Main Menu, select the Setup pull-down menu.
2 Select Preferences...
3 Under Answer Mode, select Fax only.
4 Click the OK button.
5 Make sure the MFC is connected to the PC.
6 Keep the PC and the Multi-Function Link ® Pro Main Menu
running at all times.
See
Setting Up the
MFC and
Computer to
Work Together
p. 14-1