Visioneer MFC7050C - Manual (Page 63)

S E T U P R E C E I V E
6-3
Receiving F
a
x
e
s
Setting Ring Delay
The Ring Delay setting determines the number of times the MFC
rings before it answers. If you have extension phones on the same
line as the MFC, keep the Ring Delay default setting of 4.
1 Press Function , 1 , 2 , 1 .
2 Press or to select Ring Delay and press Set .
3 Press or to select how many times the line rings before
the MFC answers (00–04) and press Set . (If you select 00, the
line doesn’t ring at all.)
4 Press Stop to exit.
Setting F/T Ring Time
(For FAX/TEL Mode Only)
If you set the answer mode to FAX/TEL, you’ll need to determine
how long the MFC will send you its special double ring when you
have a voice call. This ringing happens after the initial ringing
from your telephone company (Ring Delay). Only the MFC rings,
for 20, 30, 40 or 70 seconds; no other phones on that number will
ring the special double-ring. However, you can answer the call on
any extension phone (in a separate wall jack) on the same phone
number as the MFC.
1 Press Function , 1 , 2 , 2 .
2 Press or to select how long the MFC will ring to alert
you that you have a voice call and press Set .
RING TIME:20 SEC
3 Press Stop to exit.
Now, when a call comes in and the MFC is set to FAX/TEL mode,
all phones on this line will ring the number of times you selected
in Ring Delay.
You can let the MFC pick up and detect if it’s a fax or voice call.
If it’s a fax call, the MFC prints the fax. If it’s a voice call, the
MFC signals you with a double ring for the length of time you
selected in F/T Ring Time.
Even if the caller hangs up during the double ringing, the MFC
continues for the set time.
See
Operation from
Extension
Telephone
p. 6-6
Operation from
Extension
Telephone
p. 6-6
and
For FAX/TEL
Mode Only
p. 6-6