Video recording, Photo capturing, Using zoom function – Vivitar 990HD User Manual
Page 12
12
EN
Note
• Stabilization, Time Lapse, and Slow Motion functions can not be used simultaneously.
• Stabilization and Night Mode functions can not be used simultaneously.
• Pre-Record, Motion Detect, Slow Motion, and Time Lapse functions can not be used
simultaneously.
Video Recording
• Press [Video Button] to start recording. When a video is being recorded, a time indicator will display
on the LCD monitor (
). To stop recording, press it again.
• To pause recording: Press [Pause Button] to pause recording (
). To continue the recording,
press it again.
• Dual record: press [Photo Button] to capture the image.
The Dual record icon(
) appears on the
LCD monitor.
• Press [Playback Button] or touch
on the screen
to view the recorded video.
• Four resolution settings are available:
Video Quality
Full HD (1080p 30 fps)
HD (720p 60 fps)
HD (720p 30 fps)
VGA (640X480)
Note
• The image resolution captured during video recording is the same as the video resolution.
• The flash can not be used when capturing image during movies recording.
Photo Capturing
• Press [Photo Button] halfway down until the focusing frame turns from white to green. Then, press it
fully down to take photo.
• Press [Playback Button] or touch
on the screen
to view the photos.
• Three resolution settings are available:
Image Quality
16 Mega Pixels
5 Mega Pixels
3 Mega Pixels
Using Zoom Function
• The zoom magnifies images when recording video or taking photo.
1. To zoom in/out, press the Tele/Wide Button.
2. It can be set from 1X~2700X (23X Optical zoom)