VocoPro PA-MAN - Manual (Page 28)

28
The following modes are accessible but not enabled on the PA-MAN. The DVD
Decoder used in the PA MAN is standard and not specialized for this unit.
Speaker Setup
1. Downmix
LT / RT: When connecting to a Dolby Digital amplifier.
STEREO: When connecting to a stereo TV or amplifier and the disc supports 2-channel output.
VSS: When using a disc that has been formatted with Virtual Surround Sound.
Digital Setup
1. OP Mode
LINE OUT: This is the standard Digital Output setting.
RF REMOD: When primarily using headphones.
2. Dynamic Range
This selects the Line Out ratio.
NOTE: This can only be used when LINE OUT is chosen in the OP MODE options.
FULL: The audio signal peak value will be the minimum
OFF: The audio signal peak value will be the maximum.
3. Dual Mono
Here you can choose between STEREO, L-MONO, R-MONO, or MIX-MONO output modes. It is
usually recommended that you stay in STEREO mode for best results.
Setting Up Preferences, cont.