VocoPro PA-MAN - Manual (Page 29)

29
Troubleshooting
There is No Power
• Make sure the power cord is firmly connected to the power outlet
• If using a power strip/surge-protector, make sure that it is plugged in and switched on.
• Check to make sure the switch for the component you are using is in the on position.
There is No Sound from Disc
• Make sure everything is connected firmly and properly
• Make sure there are no defective cables
• Make sure all of your components are turned on
• Make sure all of the components (amp, mixer, TV, etc.) are set to the proper inputs
No Picture
• Make sure everything is connected firmly and properly
• Make sure there are no defective cables
• Make sure all of your components are turned on
• Make sure all of the components (amp, mixer, TV, etc.) are set to the proper inputs
• Make sure the TV or monitor is working correctly
The Disc Does Not Play
• Make sure the disc is inserted correctly (label-side up)
• Make sure the disc is clean and not scratched
• If using a CD-R/RW, try using a different brand as some brands might not be compatible
• Clean the CD lens using a CD lens cleaner
The Picture is Unclear
• Make sure the disc is not dirty or damaged
• Make sure that the TV TYPE is set correctly:
NTSC: In North America, Japan and many other Asian countries
PAL: In Europe
• Try restarting the disc player