VXI ITONA TC4XYY - Manual (Page 11)

VXL Instruments Ltd .
Itona TC4XYY Hardware User’s Guide
Step Four: Connect to the Server
The Thin Client can be physically connected to the server/network in three ways:
• LAN connection through TCP/IP
• Direct connection through RS232
• Dial-in remote connection through a modem
LAN connection through TCP/IP
Connect one end of a 10/100 cable to the LAN port of the client. Connect the other end to a LAN hub as
shown in the figure below.
LAN Connection through TCP/IP
ICA Server
Ethernet
HUB
10/100Base-T
Host 2
Workstation
Host 1
Winlinx Thin Client
Installation 11