VXI ITONA TC4XYY - Manual (Page 12)

VXL Instruments Ltd .
Itona TC4XYY Hardware User’s Guide
Direct Connection through RS232
Connect one end of an RS232 cross cable to a serial port of the client. Connect the other end to a serial
port of the server as shown in the figure below.
Server
COM
PORT
Winlinx
COM
PORT
RS232C CROSS
Thin Client
Direct Connection through RS232
Dial-In Remote Connection through a Modem
Connect one end of an RS232 straight cable to a serial port of the client. Connect the other end to a
modem as shown in the figure below.
Modem
Server
COM
PORT
COM
PORT
Modem
PSTN
RS232C STRAIGHT
Winlinx Thin Client
RS232C STRAIGHT
Dial-In Remote Connection through Modem
Press the power button to power up the Itona TC4xyy. The front panel LED lights up and the client boots
up with a BEEP sound and takes you to the Connection Manager screen. Refer to the Software User’s
Guide for configuring the client.
Installation 12