Verona CR 43 - Manual (Page 4)

Verona CR 43 - Honda
14
= M•L rocker switch (Medium wave -
Long wave)
Use this rocker switch to select either
medium wave (MW) or long wave (LW)
frequencies. To switch between these
wavebands simply press the rocker
switch again.
> FM•T button (Frequency Modulation)
This button is used for shifting between
the different FM storage levels I, II, III
and T (Travelstore - i.e. storing and
calling the six strongest stations of an
area).
Storing “T” - Press the FM •T button
until the seek tuning indication starts to
be displayed.
Recalling “T” - Press the FM•T button
? until T is indicated on the display.
Then briefly press the respective preset
button.“Balance” knob
To adjust the volume of the left and
right channel
? PS rocker switch (Preset Station Scan)
Pressing this button briefly samples all
memorized stations of the selected
waveband (FM, MW, LW or TS).
@ TREB (Treble)
to adjust trebles.
A BASS
to adjust basses.
B FAD (Fader)
(front/rear volume):
adjust using the lever.