Verona CR 43 User Manual
Page 7
17
Verona CR 43 - Honda
DE
UT
S
C
H
EN
GLI
S
H
IT
A
L
IANO
POR
T
UG
UE
S
NE
DE
RL
AND
ESP
A
G
ÑO
L
SVEN
SK
A
F
RANÇAI
S
period, “000”. Following this, it is essential
that you enter the correct code number.
Switching Code System Off
If you wish to switch the anti-theft code sy-
stem off:
●
turn off the radio,
●
simultaneously press, and hold, preset
buttons 1 and 4
;
●
turn the set back on. “Cod” will then
appear in the display
:
.
●
release the preset buttons 1 and 4
;
.
“000” then appears in the display
:
.
●
Enter the code number that is in the
Blaupunkt car radio pass and confirm:
See example “First-time operation ...”.
The anti-theft coding system has now been
deactivated.
Switching the Code System Back On If
you wish to re-activate the anti-theft
code system:
●
turn the radio off,
●
simultaneously press, and keep de-
pressed, preset buttons 1 and 4
;
,
●
turn the set back on. “Cod” briefly ap-
pears in the display
:
and then the set
is switched on.
Amplifier Section
ON/OFF
For switching the set on,
●
turn button
1
.
Your stereo is now ready for operation.
For switching the set off,
●
turn button
1
.
Volume control
●
turn button
1
.
Balance Control
Use button
1
to balance the sound impres-
sion of the right and left channel speaker.
●
Pull (lock in) button and turn.
After the adjustment
●
slightly press button.
Fader control
If four loudspeaker are connected, the front/
rear sound impression of the loudspeakers
(fader) can also be modified using lever
B
.
Adjusting trebles
●
turn button
@
.
Adjusting basses
●
turn button
A
.
The anti-theft code system is now activated.
Now whenever the set is turned on, “CODE”
will appear briefly in the display
:
.
Optical indication of theft protection
As optical warning of the encoded car radio,
the LED
6
flashes when the ignition is
switched off, provided the car radio has been
connected correspondingly.
For this, please see the corresponding instal-
lation instructions.