Vax V-008T - Manual (Page 10)

www.vax.co.uk
10 belt or brushbar replacement
Lift and remove brushbar (Fig.6/3). Dispose of old belt.
To replace belt or brushbar:
Slide belt onto motor shaft (see Fig.6/4).
Place new belt in area of brushbar without bristles (Fig.6/5).
With new belt in place, pull and slide brushbar into nozzle
making sure that the brushbar end caps are in the correct
orientation (inset). Rotate brushbar manually to make sure
belt is properly aligned (Fig.6/6).
Re-attach nozzle guard (Fig.6/7).
Fig.6/2
Fig.6/5
Fig.6/6
Fig.6/7
Fig.6/3
MOTOR SHAFT
Fig.6/4
Vax V-008T User Guide.qxd 28/6/07 13:57 Page 10