Vax V-008T - Manual (Page 11)

11
Vax Careline 0870 606 1248
general maintenance
Secure by aligning the three (3) tabs in the base slots.
Replace all three (3) screws to secure nozzle guard (see
Fig.6/9).
7. General Maintenance
WARNING: To reduce the risk of injury from moving
parts, unplug before servicing.
Debris removal - hose:
Check to see if dirt container is full; empty if needed
Plug cleaner in and check to see if there is any suction at
end of hose. If there is suction at end of hose, move on to
debris removal section below. If there is no suction at the
end of the hose, follow these steps:
1 Remove the dirt container (see section 5) and check
dirt container inlet located on cleaner (Fig.7/1).
Debris removal - nozzle guard:
Remove nozzle guard (Fig.7/2) by removing three (3)
screws. Remove obstruction.
SLOTS
TABS
Fig.6/8
Fig.7/1
Fig.7/2
Fig.6/9
!
Vax V-008T User Guide.qxd 28/6/07 13:57 Page 11