Visioneer 9650 - Manual (Page 105)

98 V ISIONEER 9650 S CANNER U SER ’ S G UIDE
4. Adjust the Brightness, Contrast, and Resolution until the picture
is what you want. You can also change the picture type again, for
example, from color to grayscale, and you can change the paper size
from the Paper Size menu. To scan only a portion of the image see
the section “Scanning Part of an Image” on page 99.
5. When you are satisfied with the preview image, remember to place
the document into the ADF again if you’re scanning a stack of
pages. Click Scan.
6. When you’re finished scanning items, click Done to close the Basic
Interface.
7. If you’re using PaperPort, the PaperPort Scan message box opens.
Click Done.
When scanning is complete, thumbnail images appear on the
PaperPort Desktop.
Single page items appear as individual thumbnails on the PaperPort
desktop.
Depending on the file type you selected for the images, multiple
pages appear as PaperPort stacks. For example, images with the pdf
file type can be stacked, but images with the jpg file type cannot
and will appear as individual items.
A thumbnail image
of the scanned item
appears on the
PaperPort desktop.
The small icon
represents the file
format, in this case the
PaperPort format.