Visioneer 9650 - Manual (Page 43)

36 V ISIONEER 9650 S CANNER U SER ’ S G UIDE
The settings on the Properties window are:
Select Destination—The list of applications that can open to display
the scanned image for the selected button. To configure the list of
available applications, click the Options tab at the top of the dialog box
and select the desired options. See “Selecting Options for a Button” on
page 56 for more information.
Select Configuration—The list of available scan configurations for the
selected button. The configuration’s basic settings include: scanning
mode, resolution (dpi), page size, brightness, and contrast. To see a
selected scan configuration’s settings, click its icon. Click the icon again
to close the detailed information.
These icons next to each scan configuration indicate the scanning
mode:
Note: Some of the options on the OneTouch Properties Window (and
other OneTouch windows and dialog boxes) may be “grayed out” and
are not available. Grayed out options are not appropriate for your
Visioneer 9650 scanner.
Note: Use Configure Before Scan if you want to set the scanning
mode manually before scanning. See “Configuring Before Scanning”
on page 76.
Click the icon of a selected
configuration to view its
settings.
Color Grayscale Black and White Configure
Before Scan