Selecting video memory, Selecting an aspect ratio, Selecting video memory selecting an aspect ratio – Vidikron VERSION 50 User Manual

Page 30

Advertising
background image

30

Vidikron Vision Model 50 Owner’s Operating Manual

Basic Operation

Selecting an Aspect
Ratio

Select an aspect ratio that suits the format of
the video signal. The following aspect ratios are
available.

ANA (Anamorphic): A 4:3 image is stretched
horizontally to fit a 16:9 screen. This setting is
for 16:9 DVDs and HDTV programs.

4 X 3 (Standard 4:3): The input signal is scaled
to fit a 4:3 display mode in the center of the
screen.

L-BOX (Letterbox): An image in letterbox
format is enlarged to fit a 16:9 full screen
display; the upper and lower portions are
compressed.

I-WIDE (IntelliWide): This setting transforms
a 4x3 image to a 16x9 image.

CINEMA: The image in the Letterbox mode is
enlarged to a 16x9 image and the upper and
lower portions are compressed.

C-FILL (Cinema Fill): A 2.35 image is stretched
vertically in both directions to fill a 16:9
image.

Selecting Video
Memory

Press MEM1 to recall custom memory
settings.

Press ISF NT (Night) to recall ISF Night
settings.

Press ISF DAY to recall ISF Day settings.

NOTE: ISF settings must be calibrated
and stored by a certified ISF calibrator.
For more information, please go to www.
imagingscience.com.

Press DEF (Default) to restore factory
settings for the current source. An on-
screen confirmation message appears.
Press DEF again to confirm.

Advertising