Edimax Technology IC-1520POE User Manual
Page 64
60
Admin utility will launch automatically after installation is complete. If not, please
launch ‘IP Camera Admin’ from ‘IP Camera’ group in ‘All Programs’ by yourself.
If the IP camera is correctly installed and connected to your network, you should see
something similar like this:
All found cameras will be displayed at the left of admin utility, which begins with
‘IC-‘ and the last 6 characters of IP camera’s network MAC address (the ‘IC-E52C85’
item in this example). You can check the MAC address label at the back of the
camera to distinguish from different cameras, if you have more than one IP camera
connected to your network.
If no camera is found, please go to section 1-6 and 1-7 and check if everything is
correctly configured.
You will see a letter located at the left of camera’s name (‘N’ in the example above),
which indicates the status of each IP camera: