Edimax Technology IC-1520POE - Manual (Page 72)

68
wish to connect; you MUST know the SSID of wireless
device you wish to connect.
Channel: Select the radio channel number of this profile,
must be the same with the wireless device you wish to
connect.
Network Type: If the network device is a wireless access
point, you should select ‘Infrastructure’; if the network
device is a computer, you can try ‘Ad Hoc’.
Authentication Type: Set the authentication type required
by the network device you wish to connect here (Select
one from drop down menu).
Encryption Type: Select the encryption type required by
the network device you wish to connect here, the content
of drop down menu will vary depend on the authentication
type you selected above.
WPA Pre-Shared Key: Input the WPA pre-shared key of
the wireless device you wish to connect here. Must be the
same with the setting of the wireless device you wish to
connect, or you’ll not be able to build connection. This
option will be grayed out when encryption type is not
WPA.
Key Length: Select the key length of WEP encryption.
Must be the same with the setting of the wireless device
you wish to connect.
Key Format: Key Length: Select the key format of WEP
encryption. Must be the same with the setting of the