ACS ACK30 Smart Keyboard - Manual (Page 41)

ACR30 Reference Manual
Version 3.3 January 2009 Page 41 of 44
ACR30
Appendix A: Supported Card Types
The following table summarizes which values must be specified in the SET_CARD_TYPE command
for a particular card type to be used, and how the bits in the response to the GET_ACR_STAT
command correspond with the respective card types.
Cyber-mouse card type
code
Card Type
00
H
Auto-select T=0 or T=1 communication protocol
01
H
(*) GPM103, SLE4406
SLE4436, SLE5536 (firmware 2.10 onwards)
02
H
(*) I2C
05
H
(*) SLE4418, SLE4428
06
H
(*) SLE4432, SLE4442
0C
H
MCU-based cards with T=0 communication protocol
0D
H
MCU-based cards with T=1 communication protocol
C0
H
(**) SAM cards with T=0 communication protocol (SAM Reader only)
D0
H
(**) SAM cards with T=1 communication protocol (SAM Reader only)
Note (*) – SAM Reader does not support for memory cards.
Note (**) – SAM Reader only