Vitek VT-1256 - Manual (Page 7)

7
ENGLISH
STEAM CHAMBER CLEANING
To prolong lifetime of the iron we recommend
cleaning the steam chamber, especially in the
regions with “hard” water.
•
Set the steam supply regulator (3) to the
off position.
• Fill the water tank (11) till the MAX mark
(13).
• Put the iron on the base (8).
• Insert the power plug into the outlet .
• Set the temperature regulator (10) to the
MAX. temperature
, the (9) indicator will
light up (Pic.3).
• When the sole temperature (12) reaches
the desired temperature value, the (9) indi-
cator will go out, you can start cleaning of
the iron chamber.
• Unplug the iron, set the temperature regu-
lator (10) to the «MIN» position.
• Pull the plug out of the socket.
• Hold the iron above the sink horizontally,
press and hold the SELF CLEAN button
(pic.7).
• Boiling water together with scale will be
throwing out from the openings in the iron
sole (12).
• Slightly sway the iron back and forth, until
water goes out of the water tank (11).
• Place the iron on the base (8) and let it cool
down completely.
• When the sole (12) cools down completely,
wipe it with a dry cloth.
• Before you take the iron for storing, make
sure that there is no water in the water tank
(11) and that the iron sole (12) is complete-
ly dry.
CARE AND CLEANING
• Before cleaning the iron, make sure that it
is turned off and has cooled completely.
• Wipe the iron’s outer surface with a damp
cloth and then wipe dry.
• Sediment on the iron sole can be removed
with a cloth soaked in vinegar-water solu-
tion.
• After removing sediment, polish the sole
with a dry cloth.
• Do not use abrasive substances to clean
the sole and body of the iron.
• Avoid touching the iron sole with sharp
metal objects.
STORAGE
• Turn the temperature regulator (10) anti-
clockwise till MIN position, set the steam
release regulator (3) to the steam OFF po-
sition.
• Remove the power plug from the outlet.
• Let the unit cool down.
• Open the water tank lid (2), turn over the
iron and d rain any remaining water from
the water tank (11) (pic. 8).
• Close the lid (2).
• Store the iron vertically in a dry coo, place
out of the reach of children .
Delivery set
1. Iron – 1 pc.
2. Water bowl – 1pc.
TECHNICAL CHARACTERISTICS
Power requirements: 220V -240 V ~ 50 Hz
Power consumption: 2000 W
Specifications subject to change without prior
notice.
Service life of appliance - 3 years
GUARANTEE
Details regarding guarantee conditions can
be obtained from the dealer from whom the
appliance was purchased. The bill of sale or
receipt must be produced when making any
claim under the terms of this guarantee.
This product conforms to the EMC-
Requirements as laid down by the
Council Directive 89/336/EEC
and to the Law Voltage Regulation
(73/23 EEC)
1256.indd 7 1256.indd 7 25.03.2010 11:37:20 25.03.2010 11:37:20