Vitek VT-1255 - Manual (Page 7)

7
ENGLISH
• Set the steam supply regulator (3) to the off
position.
• Fill the water tank (11) till the MAX mark (13).
• Put the iron on the base (8).
• Insert the power plug into the outlet.
• Set the temperature regulator (10) to the
MAX. temperature: “•••” the (9) indicator
will light up (Pic.3).
• When the sole temperature (12) reaches the
desired temperature value, the (9) indicator
will go out, you can start cleaning of the iron
chamber.
• Unplug the iron, set the temperature regula-
tor (10) to the «MIN» position.
• Pull the plug out of the socket.
• Hold the iron above the sink horizontally, set
and hold the regulator (3) in the SELF
CLEAN position (pic.7).
• Boiling water together with scale will be
throwing out from the openings in the iron
sole (12).
• Slightly sway the iron back and forth, until
water goes out of the water tank (11).
• Place the iron on the base (8) and let it cool
down completely.
• When the sole (12) cools down completely,
wipe it with a dry cloth.
• Before you take the iron for storing, make
sure that there is no water in the water tank
(11) and that the iron sole (12) is completely
dry.
CARE AND CLEANING
• Before cleaning the iron, make sure that it is
turned off and has cooled completely.
• Wipe the iron’s outer surface with a damp
cloth and then wipe dry.
• Sediment on the iron sole can be removed
with a cloth soaked in vinegar-water solu-
tion.
• After removing sediment, polish the sole with
a dry cloth.
• Do not use abrasive substances to clean the
sole and body of the iron.
• Avoid touching the iron sole with sharp metal
objects.
STORAGE
• Turn the temperature regulator (10) anticlock-
wise till MIN position, set the steam release
regulator (3) to the steam OFF position.
• Remove the power plug from the outlet.
• Open the water tank lid (2), turn over the iron
and drain any remaining water from the water
tank (11) (pic. 8).
• Close the lid (2).
• Set the iron vertically and allow it to cool com-
pletely.
• Store the iron vertically in a dry coo, place out
of the reach of children.
Delivery set
1. Iron – 1 pc.
2. Water bowl – 1pc.
TECHNICAL CHARACTERISTICS
Power requirements: 220V -240 V~ 50/60 Hz
Power consumption: 1680-2000 W
Specifications subject to change without prior
notice.
Service life of appliance - 3 years
GUARANTEE
Details regarding guarantee conditions can be
obtained from the dealer from whom the appli-
ance was purchased. The bill of sale or receipt
must be produced when making any claim
under the terms of this guarantee.
This product conforms to the EMC-
Requirements as laid down by the
Council Directive 89/336/EEC
and to the Law Voltage Regulation
(73/23 EEC)
1255.indd 7 1255.indd 7 03.03.2010 15:40:15 03.03.2010 15:40:15