Set iphone push notification – Velleman IVSPROM1 User Manual
Page 14
IVSPROM1
09.11.2010
©Velleman nv
14
•
To change the video output setting manually:
o
To force the video output via MONITOR, press the left key ◄ on the DVR front panel at DVR power-
on.
o
To force the video output via VGA, press the right key ► on the DVR front panel at DVR power-on.
The setting is changed when you hear a short beep sound.
•
An alternative way to set the video output:
o
When the DVR is powered on and initialized, right-click to show the main menu, and select
“ADVANCE CONFIG” Æ “DISPLAY” Æ “DISPLAY OUTPUT PATH”.
o
Select “VGA” to switch to the connected LCD monitor, or “COMPOSITE” to switch to the connected
CRT monitor. The DVR will then reboot for the change to take effect.
9.
Set iPhone push notification
Note: only available on the human detection camera.
•
This IVS DVR series supports instant event notifications to your iPhone with our self-developed program,
“EagleEyes”, installed. When a human is detected by a human detection camera, the DVR will
immediately receive alarm signals and send to your iPhone.
Note: iPhone is the registered trademark of Apple Inc.
Note: EagleEyes is a powerful mobile surveillance program developed by AV TECH Corporation. For more
operations details about EagleEyes, visit
http://www.eagleeyescctv.com
.
For any comment or question about this program, contact Velleman. Visit
www.velleman.eu
for contact
details.
•
You need to perform some settings in your iPhone for this function to work properly.
9.1 Prerequisite
Before setting this function, make sure you have checked the following:
•
You have an iPhone with our self-developed program, “EagleEyes”, installed. For more details, see below
under program download.
•
A human detection camera is connected to your IVS DVR.
•
The event record function of your IVS DVR is enabled.
•
The motion detection function of your IVS DVR is enabled.
•
Your IVS DVR is connected to Internet. For details, refer to
http://www.surveillance-
download.com/user/CMS.pdf
.
•
Make sure the DVR is accessible over the Internet via a remote PC (not on the same network as the
DVR).
9.2 Set iPhone
Program download
•
STEP1: Go to “App Store” via your iPhone.
•
STEP2: Search the program with the keyword “eagleeyes”.
Note: You might be charged for Internet access via wireless or 3G networks. For the Internet access rate
details, check with your local network operator or service provider.
ADVANCE CONFIG
CAMERA
DE-INTERLACE (For Selected Models Only)
OFF
DETECTION
FULL
SCREEN
DURATION
03
ALERT
QUAD SCREEN DURATION (For Selected Models Only)
03
NETWORK
DWELL SCREEN DURATION
03
DISPLAY
DISPLAY
COVERT
ON
RECORD
HDD DISPLAY MODE
HDD SIZE
REMOTE
DISPLAY
OUTPUT
PATH
AUTO
DCCS
ALPHA
BLENDING
200
IVS
NOTIFY
EDIT